Before
After
Water Conditioning System in Auburn, NY
This Auburn, NY customer contacted Halco looking for a water conditioning solution. His water was tested and showed that it was extremely hard at over 100 grains per gallon. The water also had a very high iron content. Halco technicians installed this new Hydrotech water conditioning system that will ensure the customer has safe, clean and clear water going forward!
Before
After
New Water Treatment System in Ithaca, NY
This Ithaca, NY customer contacted Halco because he was having issues with water quality, and his existing water conditioning system was not working properly. The water was hard, high in iron, and high in sulfur, causing rusting on plumbing fixtures, scale on water-using appliances, a rotten egg taste and odor, and more. Halco technicians installed this new HydroTech water conditioning system that will ensure the customer’s water is safe, clean, and clear with no unpleasant tastes or odors!
Before
After
Same Day Furnace Replacement in Clyde, NY
This Clyde, NY customer contacted Halco Thursday morning as his furnace stopped working and he had no-heat. Being a long-time Halco customer, and with no means of secondary heat, the technician on site worked with office staff to coordinate a same day install. By mid-afternoon on Thursday, the gentleman had a brand-new furnace installed and was very thankful for the immediate action taken by Halco. He now has peace of mind knowing he will stay warm and comfortable this holiday season.
Before
After
Furnace Installation in Rochester, NY
Wow! Check out this sleek new furnace installed for a customer in Rochester, NY! This customer initially contacted Halco for a furnace estimate, but after learning about the no-cost energy assessment, he decided to move forward in that direction. From the energy assessment, the customer learned where his home was underperforming and decided to add insulation, in combination with this new furnace, to increase the comfort in his home as well as the home’s efficiency.
Before
After
Manufactured Home Furnace Replacement in Syracuse, NY
This manufactured home in Syracuse, NY was suffering from air leaks, poor insulation, and an inefficient heating system. Combined, these issues were taking a big bite out of the homeowners budget. After receiving her no cost home energy assessment from Halco, this customer was qualified to make improvements to her home through available energy saving programs. Halco air sealed the home, insulated the underbelly, and installed this high efficiency furnace at no cost to the customer!
Before
After
Solar Installation in Auburn, NY
This customer was introduced to Halco during the SolarizeCNY 2015 program – an initiative aimed at creating affordable and obtainable solar options for Central New York homeowners. The customer was interested in going green for both financial and environmental reasons. Halco installed a 15.34 kW roof-mounted solar array which will offset 100% of this customers baseload usage!
Before
After
Solar Install in Middlesex, NY
This 8.175 kW solar electric system was installed for a customer in Middlesex, NY. First the customer had to clear some trees to avoid any shading issues. The system was then installaed as a 25 panel array. It was designed to generate approximately 8,894.8 kWh per year which is equivalent to a carbon dioxide emissions savings of approximately 13,522 lbs.!This customer has taken a huge step towards energy independence and reducing his environmental impact!
Before
After
Navien Combi Boiler Installation in Auburn, NY
This Auburn, NY customer contacted Halco for a no-cost home energy assessment to learn where her home was wasting energy and what improvements could be made. While we were there for the assessment, we talked about her old, inefficient boiler and water heater and discussed upgrades that would provide the largest energy efficiency gains. Not only did this customer move forward with solar, but we also installed a Navien Combi Boiler to support her heating and DHW needs for the entire home. In addition to saving money on her gas usage, she was also able to free up a lot of floor space in her basement!
Before
After
Solar Installation in Auburn, NY
This Auburn, NY customer contacted Halco because she wanted to go green and save on her electric bill. She had been contemplating solar for many years and with our help, she was finally able to move forward. The customer’s home was fitted with an 8.32 kW solar electric system that was installed as a roof-mounted array. As designed, the 26 panel system should generate around 9,118.4 kWh per year. The energy produced by this system corresponds to a CO2 emissions savings of 13,862 lbs. per year!
Before
After
Electric Upgrade for Cortland, NY Home
We performed an electric upgrade for this multi-family home in Cortland, NY. Each of the four (4) meters were relocated to the outside of the home, each panel was replaced with a new 100-amp panel, and a single 200-amp riser was installed. With the upgrades made, the electrical work in this home is now safe and up to code!
Before
After
Water Heater Installation in Lansing, NY
This Lansing, NY customer contacted Halco for a home energy audit after reading about the no-cost service in the Halco Herald newsletter. From the audit and recommendations, the customer had her old, inefficient water heater replaced with this new, high-efficiency water heater. Along with the new unit, this customer also had some insulation and air sealing work done to ensure a comfortable and warm winter season!
Before
After
Ground-Mounted Solar Array in Cortland, NY
This 6.24 kW solar electric system was installed for a customer in Cortland, NY. The ground-mounted array consists of 24 Solar World panels and is designed to generate 7,594.4 kWh per year. The energy produced by this system will save approximately 11,545 lbs. of Carbon Dioxide emissions each year!
