Before
After
Electrical Service Upgrade in Manchester, NY
This long-time Halco customer was in need of a 200 amp electrical service upgrade, so they gave us a call. We removed the existing 150 amp service and replaced it with all-new 200 amp equipment. We installed all new breakers and brought the grounding up to code!
Before
After
Electrical Upgrade in Springwater, NY
Before and after of an electrical upgrade in Springwater, NY. We upgraded this customer’s 100-amp service to a 200-amp service before installing their new ductless mini-split system!
Before
After
Electrical Upgrade in Bloomfield, NY
Here are some service panel pics from an electrical upgrade in Bloomfield, NY. The old panel is called a Pushmatic, which is a very old panel that is obsolete after the company went out of business. Pushmatics can be a fire hazard and finding parts can be difficult.
Before
After
Electrical Panel Upgrade in Rochester, NY
This two-unit home in Rochester, NY received a 200 amp electrical upgrade as part of a larger project that Halco was working on. Our home energy department was installing a 50-gallon heat pump water heater for the customer, and the electrical service needed to be upgraded in order to proceed.
Before
After
Electric Upgrade for Cortland, NY Home
We performed an electric upgrade for this multi-family home in Cortland, NY. Each of the four (4) meters were relocated to the outside of the home, each panel was replaced with a new 100-amp panel, and a single 200-amp riser was installed. With the upgrades made, the electrical work in this home is now safe and up to code!
Before
After
Electrical Panel Upgrade in Willard, NY
This Willard, NY customer needed a line ran from her electrical panel to her new electric dryer, so she contacted Halco for assistance. Because the customer’s existing panel was full, Halco technicians gave her the option of installing a new box or adding a sub panel. Installing a sub panel would require tandem breakers and because the customer had a significant amount of tandem breakers already, this was not the best option. The customer chose to have us upgrade her panel to a new, 30 space 100 amp panel and now she is fully functioning and up to code!
Before
After
Electrical Services in Lyons, NY
This Lyons, NY customer contacted Halco because he lost 1 phase on his underground 200 amp service. Instead of trying to find the break, the customer decided to have the entire service replaced. Halco technicians installed a new meter can, service entrance, ground loop and 2′ pvc pipe. We also replaced the customer’s existing 30 space panel with a new 42 space 200 amp panel that is all up to code!
Before
After
Sub Panel Installation in Trumansburg, NY
This Trumansburg, NY customer contacted Halco to install an electrical sub panel in their newly built garage. Starting at the customer’s main panel, our technicians ran the conduit around the side of the home, under the deck and to the garage and then installed a new 60 amp sub panel on the garage wall.
Before
After
Electrical Panel Upgrade in Alfred, NY
In the process of installing a solar electric system for this Alfred, NY customer, technicians discovered the electrical panel was old and unsafe with a long history of fire risks! We upgraded them to a new 200 amp panel, installed alongside their new SunPower solar system!
Before
After
Electrical Panel Replacement in Seneca Falls, NY
Halco technicians were called to this Seneca Falls, NY home to assist a customer with some electrical issues. Due to water damage as well as rust build up, the 200 amp panel was completely replaced. The customer can now live comfortably knowing that their electrical panel is safe and up to code!
Before
After
200 amp Underground Service in Ithaca, NY
Halco service technicians were called to this Ithaca, NY home because the customer had no electric. It was quickly apparent that there was no voltage coming into the line side of the meter meaning there was either a break in the line underground or on the riser on the pole. After verifying that the break was not on the pole, the next step was to start digging. Technicians found the break and established that the pipe had no bushings installed when it was originally put in. Bushings go on the ends of pipe to keep a smooth transition from pipe to wire and because there were no bushings, this caused the pipe to become burned and corroded over time. Our technicians cleaned the conduit out, re-pulled new wire, and installed UL listed underground splice kits. They then sand padded the ditch for protection of the splices and conduit bushings and the repair was complete!
Before
After
Electrical Panel Upgrade in Waterloo, NY
These Waterloo, NY customers needed help with their electrical panel in a major way! After contacting Halco, our technicians were able to upgrade the existing panel and ensure that everything was safe and up to code.
